ESmoke Limited (P/N EKL1000)

OEM EVAP-Approved Smoke Machine (Standard Model)

Leaks Found With ESmoke Limited:

• Vacuum Leaks • Exhaust Leaks • EGR Leaks • Under Dash Leaks • Throttle Body Components • Brake Booster Leaks • Turbo and Supercharger • Head Gasket Leaks • Vacuum Subsystems • Injector O-Ring Leaks • Wind/Water Leaks • Oil Leaks • Air Injection Leaks • MAP Sensor Leaks • ...and many more

Features:

• 2-Year Warranty
• Free refill of UltraTraceUV® ultraviolet smoke
  solution, good for about 2-years of testing
• Most economical OEM EVAP-Approved model
• Utilizes OEM-approved licensed technology from STAR EnviroTech, Inc., the only technology designed for and capable of being used with nitrogen, for safer EVAP testing! Uses shop air for general purpose leaks
• Can connect right to tire inflation nitrogen generator
• Patented UltraTraceUV® solution - the only OEM-approved dye
• Basic EVAP and general purpose applications
• No manual flow control valve to worry about turning off! Our auto shutoff safety valve stops gas fumes from potentially filling your work bay
• Auto-Correct EVAP pressure - not adjustable to avoid possible pressure damage to vehicle
• Works with nitrogen or shop air to meet all OEM test requirements for all makes and models
• Full range flow meter covers all EVAP leak ranges: gross (.080") small (.040") and very small (.020")
• 500 tests per refill
• User refillable

Specifications:

• Height 15 in. (38.1 cm) • Supply Pressure 13 in./H2O (0.032 bar) • Width 8 in. (20.3 cm) • Supply Volume 15 LPM • Length 15 in. (38.1 cm) • Operating Temp. Range 45ºF to 140ºF • Net Weight 23 lb. (10.4 kg) (7.2ºC to 60ºC) • Shipping Weight 26.5 lb. (12.0 kg) • Smoke Supply Line 10 feet (3m) • Power Supply 12 volts DC Power Supply Line 10 feet (3m) • Power Consumption 15 amps. • Remote Starter Cable 10 feet (3m)

_________________________________________________________________

Inert Gas Pack (P/N EKP1030)

• NEW Inert Gas Pack provides safer EVAP testing in a very portable kit. It provides all the power of a large gas cylinder but fits into the palm of your hand.
• Do about 25 EVAP tests per refillable 20 oz. cylinder. (This is liquid inert gas, which lasts much longer than a 20 oz. gas-only cylinder.)
• Meets SAE International technical papers inert gas recommendations
  (2008-01-0554 & 2007-01-1235) for EVAP system testing.
• Using air as the smoke carrier is not recommended when testing a fuel vapor (EVAP) system. Air can create a flammable fuel mixture in the vehicle's fuel tank.
• Automakers also require the use of an inert gas when testing an EVAP system.