If these links do not work for you copy and paste the address below into your email account, put receive or cancel updates in the subject line and press send. This will automatically update your information in our database.
updates@automotivetestsolutions.com
_________________________________________________________________________________
EScope Limited Download and Installation of latest version - Rev 1.08:
For detailed for instructions on installing the EScope Limited update, click here.
WARNING! Due to differences in Win Vista and Win 7, EScope Limited version 1.07 will install to a different location from previous versions. This means you will have to move your saved ScreenJPEGs and Data from the old location to the new location. Installing EScope Limited version 1.07 will not disturb your existing data! It will be up to you to move your files after installing this new version. If you have Windows XP, Windows Vista 32-bit, or Windows 7 32-bit your existing data is located, by default, in c:\Program Files\EScope Limited\Data and c:\Program Files\EScope Limited\ScreenJPEGs. If you have Windows Vista 64-bit or Windows 7 64-bit your old data files will be in c:\Program Files (x86)\EScope Limited\Data and c:\Program Files (x86)\EScope Limited\ScreenJPEGs. The new location is under c:\Automotive Test Solutions\EScope Limited\Data and c:\Automotive Test Solutions\EScope Limited\ScreenJPEGs. Simply copy or move the files in those old locations to the new locations.
Quick Start Instructions:
- Download http://www.automotivetestsolutions.com/download/Setup_Escope_Ltd_1.08.exe (~64MB) to your desktop.
- Double-click on the downloaded file on your desktop to view the zipped contents.
- Double-click on Setup (Application) to install the EScope Limited. If the installer asks you if it is OK to uninstall the existing version allow it to do so and then run the Setup a second time to install the new update.
- Besides the requirement for having the EScope Limited interface hardware connected to your computer you must also have the proper DAQ driver installed to use it. See "Driver Download" at the bottom of this page for driver details.
Revision History (most recent version can be downloaded above)
-
02/03/2012: Rev 1.08:
- Added scaling options for new Rev2 versions of Vacuum and 300 PSI pressure sensors.
- Replaced old Cam/Crank sensor waveform library with a new bigger and better library of waveforms. The new library has been extended with more cam shaft & crank shaft correlations. Many of these patterns have #1 injector & #1 ignition coil waveforms as well.
-
3/24/2011: Rev 1.07:
-
Added capability to “Zero” each channel independently (used when working with pressure transducers and ECOP)
-
Added ability to auto adjust window size when increasing for larger screens.
-
Added option to print with grey background on graphs to save ink.
-
Made scope buffer size a variable that can be adjusted on the File/Preferences pop-up.
-
Added ECOP to Range options with the ability to customize the voltage to kV multiplier for ECOP channels.
-
On Tools Menu, if no other tools are found it will say "No Other Tools Installed" instead of saying nothing.
-
Changed the installation directory from “c:\Program Files to” to “c:\Automotive Test Solutions” to keep all ATS programs, settings, and data files in one location that Windows will not prevent access to.
-
-
7/7/2010: Rev 1.06:
- Added “Preferences” link that is accessed from “File” menu. Initial preferences now allow switching between “Show Time for one Entire Sweep (Default)” or “Show Time per Division (10 Divisions per Sweep)” options for how time is displayed.
- Fixed bug that caused startup error in version 1.05 on some EScope Limiteds.
-
12/22/2009: Rev 1.05:
-
Optimized to work better with Windows 7.
-
Added "Size to 1024x574 (Netbooks)" option.
-
Allow user to close window (X).
-
Added process data routine that allows adding offsets to data.
-
Setup Max Sampling Rate to autofind at startup (48k, 46k, .. 40k are options).
-
Increased Buffer Size.
-
Added Mark Data (Page Up) button to Deep Record
-
Changed colors of "Mark Cam Shaft" and "Mark Cylinders" to faint yellow and faint green.
-
- 9/23/2007: Rev
1.04:
- Added smoothing routine to Measure & Deep Rec.
- Adding offset to Mark Cylinders for pressure transducer measurements.
- Modified Deep record save to warn if file saving to already exists.
- 5/24/2007:
Rev 1.03:
- Fixed problem where Demo Mode would automatically get selected at startup or auto-restart if DAQ board was not seen. Pop-up will now allow user to see error and re-start or select demo mode.
- Changed Mark Cylinders to be offset -25% of one division for pressure marking. This more accurately divides up the cylinders when using the pressure sensor.
- Added Demo Mode button/inidcator to Main tab.
-
4/25/2007: Rev 1.02:
-
Added several videos to setup wizard.
-
Added multiple ? Help buttons and help text tab for quick access to EScope Limited help. Also changed manual to Flash type.
-
Fixed scaling factor on 20" H20 pressure sensor. Previous scaling only showed half of actual pressure.
-
- 03/21/2006:
Rev 1.01:
- Initial release.
Driver Download (only needed if first installation):
- Use the following links
to install the the NIDAQ driver.
- Download http://www.atsnm.com/download/NIDAQ920f1CORE.zip
- Notes:
- This driver version supports Windows XP, VISTA and Windows 7 for all EScopes.
- Use the following link to install the NIDAQ driver with MAX if you are having problems the core driver.
- Download http://www.atsnm.com/download/NIDAQ920f1Config.zip
- Notes:
- This driver version supports Windows XP, VISTA and Windows 7 for all EScopes.
Phone: 505-265-5077, Toll-Free: 800-572-6112, Fax: 866-422-2931
515 Wyoming Blvd. SE Suite A, Albuquerque, NM 87123
