

EScope
(P/N
ESP1000) (Patent
Pending)
$2,995.00! $1,500.00 off original
price!
*Note: The EScope cannot be used with the
Windows Vista Operating System. EScope will only function with Windows XP
or 2000 systems.
Click
here to buy it now.
PC
Based 8 Channel Oscilloscope/Meter/Function Generator
8
Channel Dual Time Base Oscilloscope
-
All
Channels in Full Color with Masking to assist troubleshooting
-
Dual
Time Bases, Both Viewable Simultaneously on Separate Charts
-
Each
Channel can be Turned On or Off on Either Chart while Running or Holding
-
Hold
Buttons Allow Viewing of Last Five Screen Sweeps
(click
on 1/2 size screen shot to see full size image)

8 Channel Stacked
Oscilloscope
-
Stacks
Dual A Oscilloscope Data with Independent Ranges for Each Channel
-
All
Channels in Full Color with Masking to assist troubleshooting
-
Hold
Buttons Allow Viewing of Last Five Screen Sweeps
-
MultiTool
Tab allows Simultaneous Viewing of EScope Data along with Data from
other ATS Diagnostic Tools

Measure
and Deep Record
-
Use
cursors to easily measure voltage, voltage difference, period (s), and
frequency (Hz)
-
Easily
Zoom Window, Zoom In, Zoom Out, Zoom All (extents) with mouse
-
Easily
Pan using mouse
-
Data
to be measured can come from Plot A, Plot B, or Deep Record
-
Deep
Record allows continuous recording of 500,000 samples of data on all
eight channel
-
After
500,000 sample buffer has been filled recording will continue erasing
start of buffer only so the last 500,000 samples are always available
for viewing and saving to file

8
Voltage Meters

Two
Channel Timing Generator & Counter
-
One
TTL Output with Frequency and Duty Control
-
One
Pull Down Circuit with Frequency and Duty Control. Can Control High
Current Devices like Fuel Injectors, EGR Solenoids, Canister Purge Solenoids,
etc.
-
Two
Counter Inputs that can Measure Frequency, Period, Pulse Width, and
Number of Pulses
-
Chart
Graphing for Count History

Two
Channel Function Generator
-
-10
to +10 Volts DC output
-
Automotive
Sensor Simulator Intercepts Sensor Signal on Meter and Sends Modified
Signal to PCM
-
Slow
Frequency Waveform Generation: Sin, Triangle, Square, and Sawtooth (Ramp)

Demo
Mode Playback of Files
-
Files
recorded can be played back as live data
-
Provides
ideal training setup without needing problematic vehicles in classroom
-
Files
can be created by instructor or can be loaded from library provided
by ATS

Deluxe
Case with Multiple Below Accessories
- EScope Interface
Box
- PCMCIA Computer
Card and Cable to Interface Box
- EScope Software
and Driver Software for PCMCIA Card
- Hard Plastic Case
with Foam Padding
- Padded Storage
Area for Notebook Computer Storage
- AC/DC mA Current
Clamp (60A Max)
- AC/DC Current Clamp
(600A Max)
- 10 Color Coded
Coaxial Leads (BNC to Banana Socket)
- 8 Color Coded Back
Probes with Banana Jacks
- 8 Color Coded Wire
Piercers with Banana Jacks
- 12 Color Coded
Alligator Clips with Banana Jacks
- 8 12 Foot Color
Coded Extension wires (Banana Jack to Banana Plug)
- 1 12 Foot Banana
Ground Cable (Banana Jack to Banana Plug)
- 1 9 Foot Ground
Cable
- 2 Banana to Banana
Adapters
- 2 Meter Test Probes
with Banana Jacks (One Black, One Red)

Auxiliary
Port for Future Expansion
- Ignition
Analyzer (Patent Pending): View and Power Balance Testing on Most Ignition
Systems
- 5 Gas Analyzer
- Scan Tool
- Transmission Analyzer
- Cooling System
& AC Analyzer
For
the EScope we recommend the following:
- XGA (1024x768 pixel
resolution screen)
- 1 GHz Processor
Speed (faster is better)
- Windows XP, or
2000 Operating System
- 256 MB RAM (more
is better)
- 500 MB Available
Hard Disk Space
- Available PCMCIA
Slot (PC card type II is required)