DLC Breakout Box (P/N BOB1000)

• Finds communication problems fast.
• Connects to the OBDII diagnostic connector (DLC).
• Scan Tool connects to DLC Breakout Box allowing a testing interface.
• LED’s Indicates power, grounds, and signals.
• LED’s will flash indicating protocol being used - ISO-9141-2, KWP2000,
  J1850 (PWM and VPM) and CAN Bus types.
• Banana jacks allow easy entry to test circuits fast.
• Kit includes 15 ft jumper wire (if vehicle fuse is blown or ground connection to DLC is bad jumper wire can be used to quickly power or ground Scan Tool).